Replacement pinion bearing for ABU Cardinal 3/33 and Zebco Cardinal 3 models.

Used brake plate with everything you need for a thumb bar left hand model; 4601, 5601, or 6601. Can be used with push-button models with the addition of the release trigger, part number 21869. Pinion gear is a 4-slot so it will work with the newer 6-pin brake only. 5.3:1 gears. Cleaned and ready to install.

Complete handle and star wheel set for left hand retrieve (models ending in 01) Ambassadeur reels.

4600 C3 level wind with lightweight line guide.  Fits all 4600/4601 Ambassadeur models.  

Set is used and in great condition. Some minor hairline scratches, but an easy 8/10. Cleaned up and ready to install. Comes with screws.

This is the flat bearing shim used in the Ambassadeur CS Rocket reels. Unlike the concave shim used in the C3 and C4 models, this one puts less pressure on the bearing race allowing the spool to spin better.

The smallest brake blocks Abu makes for the Classic style Ambassadeur. Fits pre-1981 models such as 1500C, 2500C, 3500C, 4500, 4500C, 4600C, 5000, etc.

The lightest brake blocks available, sure to make your finesse oriented Ambassadeur well capable of swinging for the fences. Fits 1989 and up Ultracast style reels only with the 2-pin brake. Sold in pairs.

Recommended upgrade for reels built for finesse fishing. These give a more gentle braking profile and match well with a lighter spool. Fits 1989 and up Ultracast style reels only. Sold in pairs.

This is a replacement for the Abu 5229 o-ring. If yours is broken or dry rotted, this is what you need to give your spool tension cap a smooth action that will stay in place under use.

These are a great alternative to the Abu 4490 E-clip. Easier to install and remove without fear of getting lost. Additionally, they put less friction on the cog wheel when used in place of the 4490 E-clip. These o-rings can be used to secure the spool pinion on the 1500C/2500C models and the pinion cup removed, creating less potential for friction. Sold in packs of 5.

M3 E-clip for affixing handles and cogs. This is not an Abu original part, but is of the same dimensions.

Replace your worn or deformed pinion yoke. This is a dead stock original ABU part, no longer produced. It fits the 1500C, 2500C, and 3500C.